Now it's time to magnetise the rear platform.
Step 17- glue 6 2 x 0.4mm magnets onto the sides of the bell / furnace.
Step 18: put a dab of paint on each magnet, then press the rear platform onto them. You will want to do this for each side of the platform.
Step 19: drill shallow holes on the 12 spots, and glue a 2 x 0.4mm magnet in each hollow. Again make sure you get the side of the magnets right.
Step 20: put some green stuff onto the holes which are in deep enough, and try and recreate the wood aspect.
No comments:
Post a Comment